China WebsiteKnow the Technology
Our systems are built with patented and certified technology
Single Line
Ultra-Fast Detection
Stainless Steel made
No Pressure
No Electrical Power Supply Needed
Easy to Install
up to 10 years – no parts replacement
Operates in Temp. of: -55ºc to 80ºc
Fully Mechanical
No Maintenance
Shock & Vibration Resistant
No electricity,
no pressure.
Born from the mining sector, we developed systems that are not allowed to fail.
No electricity
No electricity, all pneumatic.
Systems are always operable. No electric failure or malfunctions are possible.
Not dependable of batteries.
No pressure!
Most of protecfire systems have no pressure in the pipe lines. The extinguishing and detection lines are empty in standby mode. The system pressurizes only when activated.
Detect, extinguish
Systems can be mounted in matter of hours. This is a fact that will save you money!
Fine Spray Technology
A large amount of fine liquid agent droplets is sprayed through the special patented nozzles forming a huge cooling reaction surface. Thus, the fire will be rapidly deprived of thermal energy, resulting in rapid drop of temperature. The cooling effect breaks down the reaction needed to support combustion.In addition, after all the extinguishant has been dispensed, the propellant Nitrogen gas from the patented container will be discharged, resulting in a hybrid suppression system, further ensuring that no oxygen gets on to the surface.
Spy Thermo-pneumatic detector
protecfire Detection is a state-of-the-art engineering solution. Pneumatic detector works with argon gas, that is triggered by a temperature fuse bulb.
– Simple, super-fast and reliable
– No false alarms.
– Patented
– Multiple temperature range
– Sensitive to hidden fires
– Robust and Precise
– Stainless-Steel
Exclusive Extinguish Agent
The most powerful Liquid Extinguish Agent
The enormous cooling effect of TiboRex Absolute is mainly based on two physical properties:
Cooling effect due to water evaporation: The fine-spray nozzles developed specially for TiboRex Absolute produce very fine droplets, smaller than100μm, when discharging the extinguishing agent. As a result, ultra-fast evaporation of the liquid share in the extinguishing agent is achieved. Due to the required enthalpy of evaporation of 2.26 MJ/kg (equivalent to 1 litre of water) energy is extracted from the burning object in a minimum of time and it cools down substantially.
Cooling effect due to sublimation: During the evaporation of the aqueous phase some of TiboRex Absolute’s main components form crystalline structures. With the still existing com- bustion temperature, these solid structures change from the crystalline phase to a gaseous phase. The enormous enthalpy of evaporation (heat) required for this amounts to 7.23 MJ/kg.
Ultrafast extinguishing
Only small amounts of extinguishing agent required
The object to be protected remains almost undamaged
Quenching effect
Extinguishing through oxygen reduction
Also hidden fires are extinguished
Extinguishing of fires in cavities
Residue monitoring and guaranteed quality
Residues of the extinguishing agent on the object can be identified with the help of ultraviolet light. A chemical analysis (DNA) can verify and confirm that the original TiboRex Absolute was used.
Ultrafast cooling
Enormous reduction of surface temperature
Avoidance of re-ignition
Reduced effect of fire
Quick interruption of combustion process
Blanketing fat and oil fires
When cooking fats and oils burn, TiboRex Absolute uses chemical reactions to form a closed, gas-proof protective layer quenching the fire and protecting the hot fat or oil from re-ignition by cooling them down very quickly.
Environmental friendliness
Ecological and 100% fluorine-free extinguishing agent
Biodegradable
Nontoxic to humans and animals
Tiborex Absolute – 3 Stages
Cooling Effect
Fine Spray Droplets that penetrate fire very fast.
TiboRex Absolute produce very fine droplets,smaller than100μm.
Oxygen Suffocation by evaporation
Due to the required enthalpy of evaporationof 2.26 MJ/kg (equivalent to 1 litre of water)energy is extracted from the burning object ina minimum of time and it cools down substantially.
Ultra Cooling through Sublimation
Layering with solid crystals that convert to gasTiboRex Absolute’s main components form crystalline structures.With the still existing combustion temperature, these solid structureschange from the crystalline phase to a gaseous phase. The enormousenthalpy of evaporation (heat) required for this amounts to 7.23 MJ/kg.
Extinguish Agents comparison
- ultra fast cooling liquid agent
- fluorine-free
- biodegradable
- non-corrosive
- non-toxic
- use at -50°C to 80°C ambient
- temperatures
- surface blanketing /
- quenching effect
Easy to install and low maintenance
Systems can bem mounted in matter of hours. This is a fact that will save you money!
Easy & Fast to install
Simplicity is the most important when technic teams are installing systems.
Detexline systems can be in operational mode in hours.
Almost maintenance free
up to 10 years with no maintenance! This is the first system to last and last with no required interventions. Visual check and cleaning. Nothing else!
protecfire Detexline 4v installation
This is an example of a 3 hours detexline 4v system installation