现在就打电话：+65 62445880

自动灭火系统

Mining, Agriculture, Forestry, Transportation

Australian Standard AS 5062 Certified

Call now Tel.: +65 62445880

或将您的联系方式发送给我们!我们会联系你的!

所有权的独特优势：

没有压力

没有电

几乎免维护

超快的检测和扑灭

No parts need tobe replaced for up to 10 years

Simple & Easy to install

在-30至80摄氏度的温度下工作

Australian Standard AS 5062 Certified

Rapid Cooling Technology

Raptor 5062 system components

  1. Pneumatic Manual Actuator
  2. Control Panel
  3. 压力开关
  4. Pressure Gauge 1
  5. Patented Pneumatic Release Control Valve
  6. Pressure Guage 2
  7. Stainless Steel Container
  8. German Patented Heat Detector (SPY86)
  9.  X2 Nozzles

Applicable for 4 Fire Classes​

-30ºc至80ºc

没有电。

超快速 

低维护

无压力

Single-line system

(dex-ex)

全机械式

易于安装

不锈钢材质

超强壮

一个单一的管道网络!

detexline by protecfire, is a patented system that uses only 一个管道网络 用于检测和熄灭。

减去设备。

  • 更好的价值
  • 避免故障的发生
  • 安装速度最快
  • 易于提供维护
  • 简单而可靠
  • 没有错误的警报
  • 已获专利
  • 没有压力|没有压力泄漏问题
  • 无腐蚀
  • 可选镀锌钢或不锈钢材质

Raptor 5062

  • Simple Installation: Less than half the time and resources.

—————————————————————————————————————

  • No Pre-Discharge

—————————————————————————————————————

  • German Patented Heat Detector: Thermo-pneumatic detector (SPY86) mounted on stainless steel line with 9 specific activation temperatures.

—————————————————————————————————————

  • Optical & Acoustic Alarm: Alarm panel not require hard wiring.

—————————————————————————————————————

  • Commissioning: Annual servicing with pressure test, no discharge needed. 5 years comprehensive test, discharge, and some component replacement.

VS

Conventional Fire Suppression Systems
(LOP or Linear Detection Systems)

  • Complex Installation

—————————————————————————————————————

  • Pre-Discharge Required

—————————————————————————————————————

  • Linear Detection & LOP Systems: Thermoplastic Tube Assumes One Homogeneous Activation Temperature.

—————————————————————————————————————

  • Alarm Panel in Most Applications Needs to be Hard Wired

—————————————————————————————————————

  • Commissioning: 6 Monthly Servicing approx. $2100.00 over 5 years. Annual servicing approx. $4800.00 over 5 years. 5 Years comprehensive test, discharge, and some component replacement.

Stainless Steel Container - Wide Range of Sizes!

  • Available on 10L / 20L / 30L/ 50L
  • Multiple containers can be installed in 1 system
  • Sectorization possibility (battery compartment/engine) with different areas of detection and extinguishing.
  • 不锈钢

卫星® - 热气动检测

  • 简单、超快、可靠
  • 没有错误的警报
  • Multiple temperature range: 57 ºC | 68 ºC | 79 ºC | 93 ºC | 110 ºC | 141 ºC | 182 ºC | 230 ºC | 260 ºC
  • 对隐藏的火种很敏感
  • 稳健和精确
  • 不锈钢
  • Ultra-Fast RTI 20 (Reaction Time)

Pneumatic Manual Actuator

  • Patented Unique Pneumatic Activation System
  • 不锈钢材质
  • Safety Lock System
  • Argon Gas Activation
  • Stable & Reliable
  • Easy to Operate

X2 Nozzle

  • 获得专利的独特喷嘴解决方案
  • Easy & Fast to Install – Reduces Installation Time by 70%
  • Very Small – Virtually Fits Anywhere
  • 不锈钢材质
  • Up to 90° Spray Pattern
  • High Quality, Stainless Steel and Resistant Nozzle Caps

Control Panel

  • 易于安装
  • Buzzer for Alarm
  • Optical LED Light for Test/ Alarm Engine Shutdown Capabilities

为广泛的设备提供防火保护

Mining Equipments

  • Mining truck
  • 装载铲子
  • Excavator
  • Hydraulic scraper
  • Drilling rig
  • Transportation vehicles
  • Bulldozer
  • 分级人员
  • Belt conveyor
  • Compressor

Railway Machinery

  • Tunnel Boring Machine
  • Rail Grinding Vehicle
  • Railway maintenance equipment

Port Machinery

  • Crane
  • Front Loader
  • Stacking Machine
  • Forklift

Agricultural Machinery

  • Bale
  • Tractor
  • 收割机

Others

  • Fracturing Truck
  • Fracturing Blender Truck

DracoRex is a water-based extinguishing agent, it extinguishes fires by spraying an extinguishing agent through a specially designed nozzle using argon gas as the driving force, creating a solid conical spray. The extinguishing mechanism relies on four principles: isolation, asphyxiation, cooling, and chemical suppression of flame combustion. 

功能和操作模式

灭火系统的特点是什么？

The fire suppression system is based on the principle of fine spray with rapid cooling technology. The patent nozzles spray the extinguishing agent DracoRex as very fine droplets. Through reflections and turbulence, the extinguishing agent also reaches adjacent areas, which enables the entire protected area to be protected. The service life of extinguishing agent containers (excluding fire extinguishing agents) is up to 10 years and easy to maintain. Once activated, they will need to be promptly returned to the factory for servicing or replacement to ensure that the fire extinguishing system can be operated again.

火灾探测是如何工作的？

Protecfire uses thermos-pneumatic SPY fire detection elements to detect fire. These elements only activate the fire suppression system if a specified temperature is exceeded. Failure due to the failure of electrical components does not affect the normal start of the fire suppression system. Fire detection elements with different activate temperatures can be used because the protected area is not a thermally homogeneous area, but contains different temperature zones.

What status indications are present on the fire suppression system?

Protecfire RAPTOR detex 5062 fire suppression system is pressurized in the extinguishing container when it is in standby mode. For this reason, it is necessary to monitor the container pressure by observing the pressure gauge.

Can the system shut down the equipment in the event of a fire?

Yes. RAPTOR detex 5062 fire suppression system includes a linkage function – alarm and delayed shut down equipment or vehicle engine. When there is fire, the fire suppression system is activated, pressure switch works at the same time to generate signal to the alarm to indicate the fire suppression system is being activated. The control panel does not shut the equipment or vehicle engine down immediately, but delay for a period of approximately 20 seconds. This provides the operator with enough time to attend to other related equipment or guide the vehicle to a safe location.

Control Panel and 压力开关 must be installed for these additional optional operations.In addition, the devices that are to be switched off or on must be properly connected to the control panel. The system operates independently to other electrically operated components. Power for the pressure switch is supplied via the connection to the electrical system on the equipment. 

Other features
  • No external power supply is required: Protecfire fire suppression systems operate pneumatically – mechanically. This means that they do not require any additional power supply. 
  • No pressure in the pipeline: The fire suppression system is unpressurized in the pipeline until it is activated.
  • Ease of Maintenance: Major components are needed to replace up to 10 years period.
  • Automatic and / or manual activation / or remote activation: Automatic activated by SPY fire detection elements. The fire suppression system can also be activated by pneumatic manual actuator, or remotely activated by E-SPY electric manual actuator (optional).
在发生火灾时，会发生什么？

RAPTOR detex 5062 fire suppression system consists of extinguishing agent container which is filled with extinguishing agent, pneumatic manual actuator, SPY fire detection element, nozzle, control line and extinguishing line and other optional parts. When a fire detection element is heated to its activation temperature, a mechanism opens the built-in argon propellant gas cartridge. This causes an increase in pressure in the control line. The pressure control valve in the extinguishing agent container will open to release the extinguishing agent through the line to the nozzles, completes fire suppression process. If the fire temperature does not reach its activation temperature, the fire suppression system can be activated by operating the pneumatic manual actuator. If the E-SPY electric manual actuator has been installed, the fire suppression system can be activated by remote electrical signal.

zh_CNChinese
en_GBEnglish jaJapanese ko_KRKorean ru_RURussian zh_CNChinese